7 Day Timer Switch, Week Timer Switch ATP1006-2

7 Day Timer Switch, Week Timer Switch ATP1006-2 (hereinafter referred to as “time switch”) 
is applicable for regularly controlling switch-on and off of street lamps, 
advertising light boxes and other equipments in automatic control circuit with AC frequency of 50Hz, 
rated control power voltage of 220V at most and rated working current of 3A at most. 
2. Model and Its Meaning: ATP1006-2 
3. Normal Operating Condition and Installation Condition 
3.1 Ambient air humidity: -25℃~+40℃, and the average temperature is no more than +35℃ in 24h. 
3.2 Altitude: no more than 2,000m. 
3.3 Humidity: the relative air humidity of the installation site shall be no more than 50% when the 
maximum temperature is +40℃, while it can be higher under lower temperature. Special measures 
shall be taken for the condensation occasionally formed due to temperature change. 
3.4 Pollution level: 3. 
3.5 In the medium with no explosion hazard and no gas that is enough to corrode metal and 
destroy the insulation and the place shall not have severe conductive dust. 
3.6 In the place where is provided with anti-snow and anti-rain equipment but not be full of water steam. 
3.7 In the place without significant shake, shock and vibration. 
3.8 Installation class: II. 
3.9 Transport and Storage Conditions: -25℃ to +55℃. 
3.10 Power voltage change scope: 85%~110% rated voltage. 
3.11 Protection grade: IP20. 
https://www.amazon.com/dp/B01LX0IX0Z

7 Day Timer, 7 Day Timer Switch, Digital 7 Day Timer Switch, ATP1003

7 Day Timer, 7 Day Timer Switch, Digital 7 Day Timer Switch, ATP1003
1) Type: 7 Day Timer,ATP1003
2) Time range: 24 hours or 1 week
3) Contact capacity: 16A, 220V AC
4) Coil voltage: AC 220 – 240V
5) Electrical life: 100,000 times
6) Mechanical life: 10,000,000 times
7) Working reserve time: 15 days
8) Expectance display: LCD
9) Set-up times: 20 ON/OFF
10) Operating temperature: -40 – +50°C
11) DIN rail mounting 

https://www.amazon.com/dp/B01LYNB2W2

ATP1006-6 time switch with 2 outputs

ATP1006-6 time switch with 2 outputs
Is applicable for regularly controlling switch-on and off of circuit, this product can control 2 channels output.
Each channel can be set up 7 groups time, time range for 1 second – 1 week.
2. Main Technical Parameters
2.1 Rated control power voltage: 220VAC.
2.2 Conventional thermal current: Ith 10A.
2.3 Category of the control circuit: AC-1.
2.4 Rated working current (Ie): AC-1 220V 10A.
2.5 Timing error: ≤1s/d.
2.6 control load:2 loads.
2.7 Set number of time: 7 groups.
2.8 Time control scope: 1sec~168h.
2.9 Mechanical life: ≥30,000 times.
2.10 Electric endurance: ≥10,000 times.
2.11 Installation method: Device installed, guide tracked.

https://www.amazon.com/dp/B01LXNJQJ0